Automatic Edge Banding Machine RFB465J
Parameters:
Standard Configuration:
1.Pre-milling system
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability, pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance, longer service life.
2. End trimming system
Adopt the imported precision linear guider, the automatic profiling tracking and high frequency and high speed motor of 0.37kw to ensure the smooth cut surface.
3. Fine trimming system
Fine trimming motor is 0.75kw high frequency motor. The firm trimming tools are the Φ69mm four tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 45°.
Optional:High-power high-frequency motor 1.1kw.
4.Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of cutting point.
Optional:
1.Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of cutting point.
2.Automatic feeding system
Realize edge band feeding by control the press wheels by pneumatic control.
3.Automatic feeding system
Realize edge band feeding by control the press wheels by pneumatic control.
Parameters:
| Model | RFB465J |
| Panel length | ≥120mm |
| Panel width | ≥60mm |
| Panel thickness | 10-60mm |
| Edgeband thickness | 0.3-3mm |
| Feeding speed | 13-22m/min |
| In-put voltage | 380V. |
| In-put frequency | 50HZ.3P |
| Total power | 13KW |
| Required air pressure | 0.6Mpa |
| Overall dimensions(L*W*H) | 4900*900*1560mm |
Standard Configuration:
1.Pre-milling system
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability, pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance, longer service life.
2. End trimming system
Adopt the imported precision linear guider, the automatic profiling tracking and high frequency and high speed motor of 0.37kw to ensure the smooth cut surface.
3. Fine trimming system
Fine trimming motor is 0.75kw high frequency motor. The firm trimming tools are the Φ69mm four tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 45°.
Optional:High-power high-frequency motor 1.1kw.
4.Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of cutting point.
Optional:
1.Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of cutting point.
2.Automatic feeding system
Realize edge band feeding by control the press wheels by pneumatic control.
3.Automatic feeding system
Realize edge band feeding by control the press wheels by pneumatic control.
FAQ:
Q1:How to choose the right sliding table saw?
A: We can recommend you right models based your personal requirment if you do not know how to choose.
Q2:What is the working table length of panel saw?
A: Usually is 1500-3800mm. Also It is changeable according to clients requests.
Q3:How to ensure the safety?
A:There are the overload and overheat protection that ensure the safety of working people
Q4:How long the table saw machine can be used?
A: It depends how you use your table saw, if use it in good maintenance, at least 8-10 years.